E-SATA Support

The VMAX A1 G4 DVR includes an e-SATA port embedded in the rear panel of the recorder. While the recorder’s internal storage drives (HDDs) will act as the primary means of storage, an external e-SATA drive can be connected for additional recording storage.

**NOTE: e-SATA storage is for recording purposes only. Footage backup/export through e-SATA is not supported.

**NOTE: The overall maximum storage capacity of the VMAX A1 G4 system may not exceed 32TB (16-ch, 8-ch) and 16TB (4-ch). It is not guaranteed that all e-SATA devices are compatible with the VMAX system. It is recommended to check if the e-SATA device is recognized by other devices (PC, etc.).

Supported/Affected Devices:

VMAX A1 G4 DVR

Using E-SATA for External Storage

After initially connecting the additional storage, the e-SATA device must be switched ON before booting the VMAX A1 G4 back up. As the system does not support hot plugging, the DVR must be rebooted before the system will recognize the newly connected device after connecting an external HDD to the e-SATA port.

After rebooting the DVR, check the System HDD menu to confirm that the system recognizes the connected e-SATA drive.

Click the Check button in the Health column. The Port information will display as “SATA: 255” if there is an internal cable connected to the e-SATA port of the motherboard.

______________________________________________________________________________

For More Information or Technical Support

DW Technical Support: https://www.digital-watchdog.com/contact-tech-support/

DW Sales: sales@digital-watchdog.com | www.digital-watchdog.com

E-SATA Support

Supported/Affected Devices:

Using E-SATA for External Storage

Related articles