Technical Bulletin
To: DW® Customers
Date: October 4, 2021
Re: DW Spectrum® IPVMS v4.2.0.33580 software patch
DW Spectrum® IPVMS v4.2.0.33580 Patch Notes
New Firmware Version: v4.2.0.33580
Current Firmware Version: v4.2.0.33307
Release Date: September 22, 2021
This is a cumulative patch that incorporates all previously released 4.2 patches.
New Features
New Device Support
- New Supported Devices :
- Axis Q1775, Q6044
- Encoders added to the analog list:
- ATV IPE1CH
- Benelink DFT6016FA
- Bosch VIDEOJET-X40
- CP PLUS CP-UNR-4K2161-V2
- Dahua X82B3Ax, DH-HCVR5432L, DH-XVR5216x, DHI-NVR4204x, X72A2A3
- Dayou UNVR-J3324
- Eneo MAM-5ME1001MTA, MHR-28N08005A
- Hikvision DS-7232x, DS-9616x, IP-32CH-x
- Vivotek VS8100x
- Honeywell HEN321x
- Inaxsys INS321644x
- IntelBras MHDX 3016
- InVid UN1B-8X8
- Moxa VPORT 461x
- Norelco SC-A314-8TVI-2TB
- SCW NVR-VGP16P16
- Wonderex WNR-2008x
- Vanderbilt CRDN1610-PA
- Videcon VUHDIPLx
- Visiotech XS-NVR3108-4K8Px
- Advanced PTZ support:
- Canon VB-H45
- Hikvision DS-2CD2DE5232x
- Multi-sensor cameras:
- Avigilon 12W-H3-4MH-DC1
- Bosch FLEXIDOME multi 7000i
- ENS Security SIPSP5x
- Hikvision DS-2DP3236x, DS-2CD6825x
- Sonitrol SN-2M-CPIR-IAW-PGI
API/SDK Changes
- Introduced the defaultRemovableDriveState VMS server configuration parameter to replace allowRemovableStorages.
- Added an option to allow ec2/cameraThumbnail to retrieve the stream’s live image.
Plugin Changes
- Added tripwire sendAlarmData support to the Digital Watchdog MX9 plugin.
Fixed Issues
Bug Fixes
- Hikvision Analytics Plugin
- Fixed an issue with Hikvision DS-2CD4A26FWD-IZS/P where the first license plate detected after midnight did not appear in the desktop client
- Avigilon 12W-H3-4MH-DC1 did not function properly and received the "No data received during last X seconds" error intermittently when streaming over RTSP. Fixed.
- NR32P8-8 NVR failed to initialize. Fixed.
- 2-way audio did not work if a custom media port was set. Fixed.
- The “With Modifier” tab was enabled by default in Joystick Settings by default. Fixed.
- The preconfigured actions for the AXIS T8311 Joystick were incorrect. Fixed.
- The desktop client crashed immediately after launching if the Axis T8311 joystick was plugged in. Fixed.
- PTZ controls on Speed Dome cameras did not work correctly. Fixed.
- Archive and live streams were limited to 60 FPS instead of the camera’s full streamed FPS value. Fixed.
- Fixed an issue where some previews would fail to load when using Preview Search.
- PTZ tours would get stuck at the first preset on Hanwha SNP-6320. Fixed.
- OpenVINO showed up in System Administration but not in Camera Settings. Fixed.
- The server used incorrect encoding on emails in non-Latin languages. Fixed.
- Fixed an issue that prevented two Hikivision cameras with identical IP addresses on different networks from being added to a cloud-connected system.
- Live streams in the desktop client would exhibit video rubber banding issues. Fixed.
- The server failed to receive signal input events from the Hanwha SPE-1610 encoder. Fixed.
- Some Dahua OEM cameras were not recognized as Dahua cameras. Fixed.
- The login error "Incorrect Username or Password" occurred when trying to log in after LDAP users were moved to a different OU. Removing and adding the LDAP users did not resolve the issue. Fixed.
- Compressed video frames passed from TestCamera to a plugin created a broken file that did not contain a video stream. Fixed.
- Rewinding archived video at high speed with motion search enabled caused excessive memory consumption. Fixed.
- After upgrading from VMS 4.0 to 4.2, fast archive scans took over an hour and reached maximum USB storage utilization. Fixed.
- Cloud merge did not work in LANs with port 443 open and port 80 blocked. Fixed.
- Images in VMS server email notifications were not shown. Fixed.
- Maximum FPS was lower than expected on Pelco IJV522-1ERS. Fixed.
Improvements
Software Improvements
- New configuration menu for officially supported joysticks (Open Main Menu > click Joystick Settings)
- Added support for SPC-2000 Joystick to the desktop client.
- The default search filter in Bookmark Log is now one week instead of one year.
- Hikvision Analytics Improvements
- Added support for a new face detection method called “Face Capture”, available on compatible Hikvision cameras
- Enabled ONVIF by default on ACTi A71 cameras to fix intermittent disconnections that occurred when using the ACTi API.
Bug Fixes
- Avigilon 12W-H3-4MH-DC1 did not function properly and received the "No data received during last X seconds" error intermittently when streaming over RTSP. Fixed.
- NR32P8-8 NVR failed to initialize. Fixed.
- 2-way audio did not work if a custom media port was set. Fixed.
- The “With Modifier” tab was enabled by default in Joystick Settings by default. Fixed.
- The preconfigured actions for the AXIS T8311 Joystick were incorrect. Fixed.
- The desktop client crashed immediately after launching if the Axis T8311 joystick was plugged in. Fixed.
- PTZ controls on Speed Dome cameras did not work correctly. Fixed.
- Archive and live streams were limited to 60 FPS instead of the camera’s full streamed FPS value. Fixed.
- Fixed an issue where some previews would fail to load when using Preview Search.
- PTZ tours would get stuck at the first preset on Hanwha SNP-6320. Fixed.
- OpenVINO showed up in System Administration but not in Camera Settings. Fixed.
- The server used incorrect encoding on emails in non-Latin languages. Fixed.
- Fixed an issue that prevented two Hikivision cameras with identical IP addresses on different networks from being added to a cloud-connected system.
- Live streams in the desktop client would exhibit video rubber banding issues. Fixed.
- The server failed to receive signal input events from the Hanwha SPE-1610 encoder. Fixed.
- Some Dahua OEM cameras were not recognized as Dahua cameras. Fixed.
- The login error "Incorrect Username or Password" occurred when trying to log in after LDAP users were moved to a different OU. Removing and adding the LDAP users did not resolve the issue. Fixed.
- Compressed video frames passed from TestCamera to a plugin created a broken file that did not contain a video stream. Fixed.
- Rewinding archived video at high speed with motion search enabled caused excessive memory consumption. Fixed.
- After upgrading from VMS 4.0 to 4.2, fast archive scans took over an hour and reached maximum USB storage utilization. Fixed.
- Cloud merge did not work in LANs with port 443 open and port 80 blocked. Fixed.
- Images in VMS server email notifications were not shown. Fixed.
- Maximum FPS was lower than expected on Pelco IJV522-1ERS. Fixed.
Additional Resources
Installation File Download
- Build Number: 33580
- Password: pwb5wn
Installation File Download
- Ubuntu x64 Client Installer
- Ubuntu x64 Server Installer
- Paxton Net2 Pro v5 Plugin Installer
- Paxton Net2 Pro v6 Plugin Installer
- Windows x64 Client Installer
- Windows x64 Server Installer
- Windows x64 Client/Server Bundle Installer
- Windows x64 Test Camera
- MacOS Client Installer
- Edge ARM Server Installer
- Cross-platform – SDK: Camera
- Cross-platform – SDK: Metadata
- Cross-platform – SDK: Storage
For More Information or Technical Support
DW Technical Support:
Toll-free: 866.446.3595
digital-watchdog.com/contact-tech-support/
_____________________________________________________________________
866.446.3595 [email protected] www.digital-watchdog.com
Rev: 10/21 Copyright © DW. All rights reserved. Specifications and pricing subject to change without notice.