You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.

Updating MEGApix Camera Firmware with a Browser

Updating MEGApix Camera Firmware


Affected Roles:  Administrator

Complexity:  Low to Medium

Last Edit:  June 2, 2020


Camera Firmware

Similar to keeping a video recorder up to date, it is recommended to ensure that camera firmware is kept up-to-date to mitigate video loss, camera discovery issues, and other operational problems.  Additionally, this method can be used to flash the firmware of the camera for troubleshooting purposes.

This article will outline how to upgrade firmware for a MEGApix camera through its web client.

Note:  The images provided may appear differently for your camera, depending on the camera model.

Supported/Affected Devices

  • MEGApix Camera Series

Updating Firmware Process

To update camera firmware:

  1. Obtain the latest firmware for your DW camera.

Open a web browser and visit

Enter the camera model into the search bar, then download the latest firmware version from the camera’s product page.  The file can be located under the Software tab of the camera’s product page.

  1. Connect with the camera’s web client.

Enter the camera’s IP address into the browser’s address bar.  If the camera has been assigned to a network port value of anything other than 80, you will need to specify the port value in the address bar as well.


Camera IP:

Port:  8245

Example URL:

  1. Log into the camera as the Administrator.

If you have not set up a new Username and Password yet, use:

    • Default Username:  admin
    • Default Password:  admin

Note:  DW cameras now require a password assignment when initially connecting with the camera.  For more information, please read Assigning Passwords to IP Cameras.

  1. Locate the Firmware Update or Upgrade menu in the camera’s settings configuration. This menu can typically be found under the Maintenance section.

Click the Upload Firmware button or the Choose File button, then select the firmware file from your computer.

  1. Click the Upload or Start F/W Update button to begin the upgrade process.

Allow the system to complete the upgrade process. Once the camera has finished updating, the device will reboot.                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • 468
  • 28-Jun-2022