Affected Roles: Administrator
Complexity: Medium to High
Last Edit: May 8, 2020
Ai-RGUS is an automated, AI and deep learning software solution to eliminate the worry of missing video evidence. The only currently existing solution to this problem is a process called “manual verification” which is when a person examines the view of each camera in the system in order to find any viewing problems. This process is time-consuming, expensive, and very subjective.
With Ai-RGUS, you can rest assured knowing that you can count on an essential piece of equipment (i.e., your camera system) while saving money and saving operational overhead on the manual, human labor that will only achieve a lower level of certainty. Ai-RGUS is a must-have for any organization that values the importance of its video evidence.
Taking into account all the factors required for a robust manual verification process, it takes approximately 20 seconds to verify a single camera. This figure includes pulling current camera images from the VMS, getting each camera’s reference image(s), comparing the images, quality control, and breaks. The benefits of using an automated system is compared to manual verification in the table.
Ai-RGUS uses AI and deep learning to automatically compare the current view of the camera against an approved reference view. It provides daily reports and automated alerts notifying you of the unhealthy cameras along with a diagnosis (e.g., blurry image, tilted view, blocked view, low-light, glare, feed down). In addition, it monitors the more time-sensitive conditions such as low-light, glare, and feed down up to every hour.
Ai-RGUS benefits offer peace of mind:
After the DW Spectrum Server is installed and can be accessed through a network, complete the following steps to install AI-RGUS:
Choose how Ai-RGUS will connect to your cameras.
Fill out the Ai-RGUS Registration Form to receive payment instructions.
Once Ai-RGUS receives payments, you will receive an email to create a username & password to access the online dashboard and to provide additional information about the available devices.
Use the link provided in the email to:
To register a new device, use the dropdown to select Digital Watchdog Spectrum and provide the device’s IP address, port, username, password, hardware type, etc.
Note: If you chose Cloud in Step 1, camera inspection will automatically begin after the device information has been provided.
Note: If you chose On-premise in Step 1, open the Ai-RGUS Dashboard. In the Device Manager, click the download on-premises installer button to download the latest installer for your devices. This file may take a few minutes to download.
To view inspection results, please log in to the Ai-RGUS online dashboard at https://app.ai-rgus.com. This dashboard is best accessed through Chrome or Firefox browsers.
In this section, we describe the Email/Reporting Settings, which can be accessed from the home screen by clicking on the dropdown menu next to the user icon on the top-right corner and selecting Settings.
Reports are the daily reports of unhealthy cameras and whether the cameras are live or not. Please fill in the information in the appropriate boxes and the report will be sent automatically after inspection to the specified personnel.
After each inspection, Ai-RGUS will automatically send alerts in DW Spectrum. You do not need to configure anything, Ai-RGUS will automatically provide this functionality. Generic Events will appear in the Notification Panel on the right-side of the DW Spectrum Client.
To specify custom actions based on Ai-RGUS alerts, you can configure DW Spectrum to take specific actions. More information about setting up Events and Actions can be found here: https://digital-watchdog.com/dwspectrummanual/index.html?notifications.htm
To contact Ai-RGUS for support with their product:
Email – [email protected]
Phone – (919) 249-8701
Website – https://ai-rgus.com
Twitter - @ai_rgus
LinkedIn – https://linkedin.com/company/airgus