DW Technical Bulletin

To: DW® Customers

Date: May 30, 2024

Re: DW Spectrum 5.1.4.38659 Release Notes

DW Spectrum IPVMS Software Update 5.1.4.38659

-----------------------------------

New Software Version: DW Spectrum 5.1.4.38659

Previous Software Version: DW Spectrum 5.1.3.38363

Release Date: May 30, 2024

-----------------------------------

In-Client Upgrade Information

In-Client Upgrade:

Build Number: 38659
Password: dad62j

Important Notes

Support for Microsoft Windows 8.1 and Microsoft Server 2012 will be discontinued in the next major release (6.0/Gen6).

DW Specific Improvements and Fixes

DW Spectrum Client now supports all the languages supported by the Global version:
- Catalan
- Chinese Simplified
- Chinese Traditional
- Czech
- Dutch (Netherlands)
- Dutch (Belgium)
- English (UK)
- English (US)
- Finnish
- French
- German
- Hebrew
- Hungarian
- Italian
- Japanese
- Korean
- Norwegian
- Polish
- Portuguese (Portugal)
- Portuguese (Brazil)
- Russian
- Spanish
- Swedish
- Thai
- Turkish
- Ukrainian
- Vietnamese

General Improvements and Fixes

Improved support for Nvidia T1000 graphics cards in multiple monitors and multiple tile configurations.

Analytics Improvements and Fixes

Event Post-Recording time did not correspond to the value specified in the Event rule. Fixed.
VCA analytics is enabled on Videosec cameras.
If the recording schedule was not set on a device, Object Search was unable to find some objects. Fixed.
The Objects Tab was not shown when the Sample Plugin was enabled. Fixed.
The Rules engine would reset the chosen Object Type for the "Analytic Object Detected" event. Fixed.
Event Rules Engine did not allow setting a pre- and post-recording time for one-time, fixed duration Events. Fixed.
If “Declare additional event types” was enabled on the “Stub: Events” plugin then the event types were not displayed in the Event Rules Engine. Fixed.

Device Support Improvements and Fixes

Newly Supported Devices:
- Provision ISR DMA-340IPENx
- Karel NBE-454Zu-25
- Hikvision DS-2TD4237
Encoders added to the analog list:
- Winic AR324x DVR
- Dahua N84B5N, N82B3P
- Clinton Electronics CE-E04HDA, CE-E16HDA
Multisensor Cameras:
- Axis P3737PLE
- Hikvision DS-2SE7C432MW-AEBx
- Avigilon 32c-h5a-4mh
- Raysharp RS-CT252N6TNB, TB2XTH36IP5
Advanced PTZ:
- Hikvision DS-2TD4228-10/W
- EUKLIS KLIS_D40X-IP-3M-IRD
- Dahua 5A445XANR
- i-PRO WV-S66300-Z3L, WV-S66300-Z4, WV-S66300-Z4L, WV-S66600-Z3L, WV-X86530-Z2_PTZ, WV-X86531-Z2_PTZ, WV-S66600-Z3, WV-S66700-Z3, WV-S65302-Z2, WV-S65340-Z2, WV-S65301-Z1, WV-B-S-U65300-ZY, WV-U61300-ZY, WV-S65340-Z, WV-S61501-Z1, WV-S65501-Z1, WV-S61302-Z4
Device Specific Fixes:
- If the "Allow System to optimize camera settings" option was disabled, stream profiles were still created on Axis cameras. Fixed.
- Camera profile (stream resolution) was not properly handled on Axis analog cameras. Fixed.
- Bosch FLEXIDOME 5100i IR object "Vehicle" received as "unknown". Fixed.
- Provision ISR DMA-340IPEN-28 duplicated primary stream. Fixed.
- On Milesight cameras, the Desktop Client notifications triggered by camera events could have incorrect timestamp. Fixed.
- On Sharp YK-P02AG, Server configured the low-resolution stream as the primary one, and did not configure the secondary stream. Fixed.
- DAHUA DHI-VTO2202F-P could not be discovered manually. Fixed.
- Some Hanwha cameras were discovered and configured through Onvif with the primary resolution lower than expected. Fixed.
- Pelco VS1NN60 could not be discovered properly. Fixed.
- 2N SIP horn speaker entered an online/offline loop. Fixed.
- The Axis I8116 intercom was duplicated in the Resource Tree. Fixed.
- Alarm input and thermal sensor were not enabled for TVTH-S01-0001-BUL-G. Fixed.
- The input signal on KO1 ITXAI CSB2-2M4P-1IMARH was not detected. Fixed.
- CSG cameras were discovered with an incorrect vendor name. Fixed.

Bug Fixes

In some cases, RTSP streams could enter a continuous online-offline loop after the RTSP stream goes offline. Fixed.
Sometimes, the Desktop Client could experience connection drops with Server when connected over a slow network. Fixed.
Audio could not work properly on some Edge devices when onvif_replay=true and audio were enabled. Fixed.
On certain cameras, the recorded footage could have playback issues when camera recording was triggered by the "Analytic Object Detected" trigger. Fixed.
Cloud systems can disconnect from the Cloud in some network environments. Fixed.
A locked Video Wall can be closed from the Desktop Client. Fixed.
Cross-System Layout that contained items from different Systems could close in case of the cloud connection interruption. Fixed.
The Desktop Client allowed replacing camera streams on a Video Wall tab even if the layout was locked. Fixed.
After closing a Camera on a Video Wall, or after a significant time passes, the layout settings can be changed. Fixed.
The Desktop Client could crash if using a joystick. Fixed.
Some streams from TestCamera could not be recorded and stored properly. Fixed.
Multi-sensor video exported in the NOV format triggered unnecessary transcoding instead of using the source codec. Fixed.

______________________________________________________________________________

For More Information or Technical Support

DW Technical Support: https://www.digital-watchdog.com/contact-tech-support/

DW Sales: sales@digital-watchdog.com | www.digital-watchdog.com